102
Extech Instruments: The brand of choice…
CFM Thermo-Anemometer
Model AN100 AN200 HD300
Air Velocity (Max Res.)
ft/min 80 to 5900 (1) 80 to 5900 (1)
m/sec 0.4 to 30.00 (0.01) 0.4 to 30.00 (0.01)
km/h 1.4 to 108.0 (0.1) 1.4 to 108.0 (0.1)
MPH 0.9 to 67.0 (0.1) 0.9 to 67 (0.1)
knots 0.8 to 58.0 (0.1) 0.8 to 58.0 (0.1)
Temperature (°F/°C) 14 to 140°F (0.1˚)/ -10 to 60°C (0.1˚) 14 to 140°F (0.1°)/-10 to 60°C (0.1°C)
Temperature (IR) — -58 to 500°F/ -58 to 932°F/
(with Laser pointer) -50 to 260°C (0.1°/1°) -50 to 500°C (0.1°/1°)
Air Flow (CFM = ft
3
/min) 0 to 9999CFM (1) 0 to 999999CFM (0.1) 0 to 999900CFM (0.001)
Air Flow (CMM = m
3
/min) 0 to 9999CMM (1) 0 to 999999CMM (0.1) 0 to 999900CMM (0.001)
Pressure
psi — —
mbar — —
inH
2
O — —
mmH
2
O — —
Pa — —
Basic Accuracy ±3%rdg; ±2°F (±1˚C) ±3%rdg; ±4°F (2°C)
Dimensions/Weight 7x2.9x1.3" (178x74x33mm)/1.6lbs (700g) 8x3x1.9" (203x75x50mm)/12.2oz (350g)
CE/Warranty CE/ 1 year CE/ ✓3 years
Specifications
HD300 CFM/CMM
Thermo-
Anemometer +
IR Thermometer
Built-in IR Thermometer for quick
and easy troubleshooting of
ceiling vents, duct work, and
other remote surfaces
• IR Thermometer has 30:1 distance
to target ratio and Laser pointer
• Simultaneous display of Air Flow
in CFM/CMM or Air Velocity
Plus Ambient Temperature
• Up to 8 easy to set Area
dimensions stored in memory
• Large backlit LCD
• 20 point AVG for air flow
• USB port includes PC software
• Includes PC software, cable, vane
sensor on 3.9ft (120cm) cable,
built-in stand, case, & 9V battery
Featuring Model HD350
CFM Thermo-Anemometers
Extech’s anemometers with CFM capabilities allow
you to input the measured area of a duct and
display air volume flow. Datalogging model also
available. Select vane type or hot wire sensors.
Software included
AN100/AN200
CFM/CMM Thermo-
Anemometers
Large backlit display of Airflow or
Air Velocity plus model with built-
in InfraRed Thermometer
• Simultaneous display of Ambient
Temperature and Air Flow or Air
Velocity
• Up to 8 easy to set Area
dimensions stored in internal
memory (ft
2
or m
2
)
• 20 point AVG for Air Flow
• Low friction 2.83"D (72mm)
ball bearing vane wheel
•
Data Hold, MIN/MAX, Auto off
AN200 Additonal Features
• Built-in IR Thermometer
• Complete with vane sensor on
3.9ft (120cm) cable, 9V battery,
protective rubber holster, and case
All Extech meters come factory
calibrated. For an additional
charge, Extech will supply your
meter complete with a
Certificate of Calibration
Traceable to N.I.S.T. with Data
at multiple points. To order
meter with NIST:
AN100-NIST
AN200-NIST
HD300-NIST
407113-NIST
407119-NIST
Limited NIST: Below products are
certified to all functions except IR
Thermometer.
AN200-NISTL
HD300-NISTL
*Only products listed are available with
NIST Certificate. Meter must be ordered
with NIST Certificate at time of purchase.
Order Meter
with NIST Certificate*
Pitot Tube
Measures Air Velocity/Air Flow/Pressure
in difficult-to-reach or tight locations
where a vane anemometer won’t fit
Differential Manometer
Low Range/High Resolution Gauge or
Differential Pressure
USB Interface & PC Software
Record data to a PC for analysis
Unique Pitot tube sensor used for measuring air
velocity, airflow, and pressure in vents, ducts and
other small openings.
Air Velocity
Pressure
(4 páginas)
(7 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais