Extech Instruments MP530 Guia do Utilizador descarregar pdf (Página 11)

50ms MAX/MIN at fast 20/s measurement mode (Model MP530 only)

Press the MAX/MIN button momentarily to activate MAX/MIN recording mode. The

LCD annunciators “MAX MIN” turn on, and the reading update rate will be increased to

20/second. The meter beeps when a new maximum or minimum reading is updated.

Press the button momentarily to read throughout the Maximum (MAX), Minimum (MIN),

and Maximum minus Minimum (MAX-MIN) readings. Press the button for greater than

1 second exit MAX/MIN mode. Auto Power Off feature will be automatically disabled in

this mode.

0.8ms PEAK capture mode (Model MP530 only)

Press PEAK button momentarily to activate Instantaneous Peak-Hold mode to capture

voltage or current signal duration as short as 0.8ms. This mode is available in DCV,

ACV, DCA, & ACA functions. The LCD annunciators “C” & “MAX” turn on. The meter

beeps when a new maximum or minimum reading is updated. Press the button

momentarily to read throughout the Maximum (MAX), Minimum (MIN), and Maximum

minus Minimum (MAX-MIN) readings. Press the button for greater than 1 second to exit

PEAK capture mode. Auto Power Off feature will be disabled automatically in this

mode.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sem comentários

Extech Instruments MP530 Guia do Utilizador Página 11